Skip to main content

Blog entry by Spencer Hardman

Components of Your Air Conditioner

In the absence of proper maintenance, air conditioners will use up more energy and wear down faster. You can extend the life of your AC by performing regular maintenance and replacing filters.

You should know that air conditioning doesn't clean indoor air. Air conditioning circulates already existing air in order to increase comfort.

Evaporator Coils

The evaporator coil can be found in the indoor component of the air conditioning system, near the blower fan. The copper tubes in the evaporator contain chemicals which are super-cold and absorb heat from the warm air inside. This causes an air flow that is both cool and full of water vapor. It reduces the amount of humidity in your home. The refrigerant flows through the lines connecting your indoor and outdoor units, dumping heat that it has absorbed outdoors. The blower pushes the cooler, dryer air into your home.

When your evaporator is dirty, it will make your system work more and take longer to reach the temperature you want. A dirty evaporator unit can lead to water vapor condensation, which creates foul odors.

It is important to regularly clean your evaporator coil in order to ensure it functions at its best. To clean your coil turn off the air conditioning unit and remove the access panel. To do this, you'll probably have to take off screws. Remember to put these screws back into their original place after you have removed them. If you are unable to remove all the dirt with a compressed air or brush, you will need to use a hand-cleaning item.

Your evaporator will become dirty if it is not cleaned regularly. This can cause the flow to be impeded. This can result in low energy efficiency as well as higher heating bills.

The Evaporator coil, hvac repair near Me along with the Condenser coil, is the second component of the heat exchange process in an air conditioner. The evaporator coil is made up of panels made from aluminum, steel or copper. These panels have tubes that are wrapped in metal foils for increased heat absorption. These tubes may be made of aluminum or copper. The coils have an anti-corrosive coating to protect them against the elements.


The compressor is the main component of an air conditioning system. It pumps the "blood" (refrigerant) through all of the other components and ensures that it is circulating. The compressor is your AC's only moving component, aside from a TX regulating valve. This means that it is more likely to be damaged than other static components. If it's not well maintained or the pulleys or belts have worn out, then your AC unit could malfunction.

The compressor increases both the temperature of the refrigerant and its pressure. The gas is then sent to the condenser. Here, it absorbs warmth from the air in your home and changes back into a liquid. The liquid is then transferred to the coils of the evaporator and exposed by the air conditioning blower to become cold.

The compressor could also cause other parts of the system not to work. A damaged compressor can result in a decrease in cooling or hot spots around your home. Fixing these issues quickly will prevent further damage.

A component that is not working properly can also be identified by low levels of refrigerant. Freon is pushed by the compressor across the refrigerant lines. If the system has leaks or any other issues, Freon will decrease. The compressor can overheat if the Freon level drops too low.

Your compressor may make a noise similar to a rumbling. You should consult the manual on how to replace the oil in your compressor. If the problem persists, you could try adding some cooking oil into the compressor.

The compressor is in the outdoor unit. This is connected via copper pipes to the indoor section of the air conditioning system. The compressor is mounted on a frame of steel and powered by either an electric motor, or gasoline engine. The air is compressed by pistons or scrolls.


The blower will take the condensed air that comes from the compressor, and push it through the vents to your house. This will ensure that your cabin is heated to the temperature you set on the thermostat. This is achieved by the blower, which is powered by motor rotation. This motor's speed can be adjusted by using a resistor.

The two main types are variable speed and one-speed. The former turns on when the thermostat indicates your home is in need of being cooling and then turns off. It is better to run it continuously at a slower speed in order for the air to circulate. It is also more efficient.

This can cause unnecessary stress on your system. It can reduce its lifespan, and increase energy costs. Your evaporator can be prematurely worn out. Consult a qualified AC specialist if you're concerned.

Depending on the blower motor, there may be multiple wires running across the frame. It may be hard to distinguish which wire is for what speed. The newer blower motor models are designed to eliminate such an issue. The different speeds are marked with colored wires, so a professional can tell the difference without having to remove the blower.

Another frequent issue with blower motors is excessive heat that could be a sign that there is an issue that is underlying. This can lead to more expensive energy bills because of the loss of efficiency.

HVAC experts recommend using your blower for an hour every day to circulate your home's air. Those who suffer from allergies will appreciate the clean air that is created by this method. By using your fan, you can avoid opening windows which increase heat in your home or allow contaminants such as pollen to enter.


It is the switch which turns off and on your air conditioning's compressor, fan and other components to achieve a comfortable interior temperature. The thermostat can compare the current temperature with your desired setting. It then reads out your settings in order to determine when you want the rest to start cooling the room.

If the thermostat isn't working, then the entire air conditioning unit will not be able to function properly. Unstable thermostats can lead to increased electric bills, less effective cooling and a hot and uncomfortable home. The thermostat is an extremely delicate device and should only be repaired by professionals.

The thermostat is susceptible to a wide range of issues. There are many types of problems, from the simple to the complex. Check the power switch to see if it is on. If you liked this article and you would like to get more info about Heatingontario blog postplease visit our webpage. Turn off the breaker if it is on and remove the cover of the thermostat in order to see the inside.

You should regularly clean the thermostat to prevent dirt from accumulating on the sensors. These sensors monitor and record desired temperatures. Consider moving your thermostat from areas that are sunny, drafty, or have obstructions in your home.

A common issue is a thermostat that continuously shows the same temperature and never alters it. This inefficient operation could result in your air conditioner cooling your home at a lower efficiency than expected. It's not uncommon for a thermostat to not turn on when the "on" button is pressed. This is a sign that the sensor signal to the thermostat has not been received properly. The thermostat should be replaced.

Often an easy adjustment or calibration of the thermostat could fix these issues. With a little knowledge, you can do this yourself or hire a technician to handle it for you. To ensure the system is running optimally, a professional should calibrate your thermometer at least once a month. This will allow you to keep your house comfortable while saving money on energy costs.

  • Share


Contact Us x